Menu
We have achieved Mentoring Zone in SBCB Assessment 1.0
HML 50

CNC Horizontal Machining Center

Designed To Provide Unsurpassed Performance, Productivity And Reliability

Salient features

  • Fem optimized structure for maximum rigidity.
  • Rigid main spindle supported on high precision bearings.
  • Laser calibrated axes for precise positioning
  • Full guarding
  • Centralized automatic lubrication
  • High speed spindle,high low end torque with minimal vibration
  • Heavy duty guide ways
  • Atc and magazine.

Description (Units)

Model - HML50 with APC HML50 without APC
Rotory Index Table and Pallet
Pallet Size mm 500x500 500x500
Tapped Holes (No.xSizexPitch) No.x mm x mm 20xM16x100 20xM16x100
Max. Load on Pallet Kgs 500 500
Max. Swing Dia. and height mm 700x800 700x800
Pallet Height from floor mm 1150 1150
Dimn. of Pallet Top from Spindle axis mm 100-660 (100-630) 100-660 (100-630)
Dimn. of Pallet centrefrom Spindle face mm 100-610 100-610
Table Indexing Steps - 1x360° 1x360°
Indexing Time for 180° Indexing sec 4 4
Pallet Changer
Swing Over Dia of Pallet Changer mm 1450 -
Pallet Changing Time Sec 9 (400 Kg Load on each Pallet) -
Capacity
X-Axis Travel mm 560+275 (ATC Stroke) 560+275 (ATC Stroke)
Y-Axis Travel mm 560 (530) 560 (530)
Z-Axis Travel mm 510 510
Feed Rates
Rapid Travers- X/Y/Z M/Min 50/40/50 50/40/50
Machining Feed Rate M/Min 0.001 to 5 0.001 to 5
Spindle
Spindle Taper Taper 40 40
Spindle Speed (Max) Rpm 8000 (7000) 8000 (7000)
Spindle Power (CONT/30 Min) Kw 17/22.5 (22/26) 17/22.5 (22/26)
Spindle Torque (S1/S6(40%)) Nm 162/239 (140/165) 162/239 (140/165)
Front BRG 10 mm 80 80
Pull Stud - Special Special
Automatic Tool Changer
Type of ATC Type Chain Chain
No. of Tools No. 40 40
Max Tool Dia mm 90/180 90/180
Max Tool Length mm 300 300
Tool Weight (Max.) Kgf 8 8
Tool Change Time Sec 1.3 1.3
Chip to Chip Sec 4 4
Tool Holder - MAS BT 40 MAS BT 40
Accuracy (As per JIS)
Positioning mm ±0.005 ±0.005
Repeatability mm ±0.003 ±0.003
CNC System Make Siemens( Fanuc) Siemens (Fanuc)
Lubrication
Lub Unit Type Cenlub-ALU-05/P.S/F.S Cenlub-ALU-05/P.S/F.S
Tank Capacity Ltrs 5 5
Coolant Equipment
Dirty & Semi clean tank capacity Ltrs 550 550
Clean Tank Capacity - Optional Ltrs 200 200
Flow Rate (Cutting) Ltrs/Min at 7 Bar 100 100
Flow Rate (Bed Flush and Shower) Ltrs/Min at 7 Bar 120 120
Flow Rate (Thru Spindle) - Optional Ltrs/Min at 24 Bar 20 20
Machine Physical Parameters
Overall Size (LxBxH) mm ~6500x3500x3300 ~5700x3500x3300
Machine Weight Kgs ~12000 ~9000
Total Connected Load Kva 40 40

Product Enquiry